Post by Superman on Jul 12, 2006 8:35:38 GMT 7
Hi to all!
Selling the following:
(1) Pre-owned, very low hours used GRADO PRESTIGE GOLD phono cartridge in mint/pristine condition
You can check the specs and some reviews/recommendations here c/o www.needledoctor.com
Here are some details:
Grado Gold Cartridge
The difference between Reference and Prestige series, basically speaking, are stylus mass, tip mass, diamond shapes and size, different coils, different wires and compliance. The cost difference between the Reference and Prestige series are the closer tolerances, skilled technicians vs assembly line production, much higher parts cost and different design in the Reference series. The Prestige series of cartridges are designed for high output and excellent stability under severe use. A considerable tip mass reduction results in a frequency response to 55 kHz and beyond and tracking forces from 1-2 grams.
The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models.
Technical Specifications:
· Output at 1KHz 5CM/sec. 5mV
· Cartridge Type: Moving Iron
· Stylus Type: Specially designed elliptical diamond
· Wire: Ultra-high purity long crystal copper
· Frequency Response: 20~60,000 Hz
· Recommended Tracking Force 1.5
· Recommended Load: 47 Kohm
· Channel Separation at 1KHz 35
· Inductance 45mH
· Resistance 475
· Compliance CUs 20
· Stylus Replacement U=user U
· Mounting S/P
· Weight 5.5
· Body: ABS plastic
click here --> www.needledoctor.com/s.nl/it.A/id.248/.f?sc=2&category=116l
list price of brand new locally is around P13,000.00, letting go for a very low price of P8,500.00 or best reasonable offer. Shipping is FREE!
(2) Mint/Pristine Condition PRO-JECT PHONO BOX MM/MC phono preamp, complete with wal-wart power supply, no box/manual
Good Sound From Sound Technology
Do not let the small size of The Phono Box fool you; the performance outweighs either its size or cost. To manufacture a high performance phono stage at this price requires simplicity of design and carefully selected components. This results in a dual mono design featuring Class A components and ultra low noise integrated circuits throughout the signal path.
Versatility and compatibility are not compromised , as the Phono Box easily switches between MM and MC using internal jumpers , while ACTI-DAMP circuitry allows for automatic impedance matching with the widest array of phono cartridges . The Phono Box is designed to connect to any line level input (aux , CD , tape , et al). Flexibility and performance per dollar make this phono stage a must for any entry-level turntable.
Features:
Metal case shields the electronics from vibrational and electromagnetic interference
Small size allows installation close to record player
Outboard power supply included
ACTI-DAMP-Circuit for automatic impedance matching for most cartridges
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Technical Specifications for the Project Phono Box:
Input impedance, MM 47k Ohm/100pF
Input impedances, MC 100 Ohm/100pF
Output voltage 200mV/1kHz at 5mV/1kHz at MM input
Gain, MM 32dB
Output voltage 200mV/1kHz at 0,45mV/1kHz at MC input
Gain, MC 53dB
Noise floor, MM -88dB
Noise floor, MC -79dB
THD 0,005%
RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
Power supply 16V/200mA AC
Power consumption 16V/40mA AC
Dimension W x D x H 112 x 115 x 30mm
Weight 280g without power supply
click here for a review c/o www.tnt-audio.com --> www.tnt-audio.com/ampli/phonobox_e.html
list price of brand new locally is around P6,500.00, letting go for a very low price of P5,500.00 or best reasonable offer. Shipping can be arranged as well...
If seriously interested, please call or text me at 0917-8004868 or 0922-8984868. Thank you very much and God bless!
Superman
Selling the following:
(1) Pre-owned, very low hours used GRADO PRESTIGE GOLD phono cartridge in mint/pristine condition
You can check the specs and some reviews/recommendations here c/o www.needledoctor.com
Here are some details:
Grado Gold Cartridge
The difference between Reference and Prestige series, basically speaking, are stylus mass, tip mass, diamond shapes and size, different coils, different wires and compliance. The cost difference between the Reference and Prestige series are the closer tolerances, skilled technicians vs assembly line production, much higher parts cost and different design in the Reference series. The Prestige series of cartridges are designed for high output and excellent stability under severe use. A considerable tip mass reduction results in a frequency response to 55 kHz and beyond and tracking forces from 1-2 grams.
The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal (UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models.
Technical Specifications:
· Output at 1KHz 5CM/sec. 5mV
· Cartridge Type: Moving Iron
· Stylus Type: Specially designed elliptical diamond
· Wire: Ultra-high purity long crystal copper
· Frequency Response: 20~60,000 Hz
· Recommended Tracking Force 1.5
· Recommended Load: 47 Kohm
· Channel Separation at 1KHz 35
· Inductance 45mH
· Resistance 475
· Compliance CUs 20
· Stylus Replacement U=user U
· Mounting S/P
· Weight 5.5
· Body: ABS plastic
click here --> www.needledoctor.com/s.nl/it.A/id.248/.f?sc=2&category=116l
list price of brand new locally is around P13,000.00, letting go for a very low price of P8,500.00 or best reasonable offer. Shipping is FREE!
(2) Mint/Pristine Condition PRO-JECT PHONO BOX MM/MC phono preamp, complete with wal-wart power supply, no box/manual
Good Sound From Sound Technology
Do not let the small size of The Phono Box fool you; the performance outweighs either its size or cost. To manufacture a high performance phono stage at this price requires simplicity of design and carefully selected components. This results in a dual mono design featuring Class A components and ultra low noise integrated circuits throughout the signal path.
Versatility and compatibility are not compromised , as the Phono Box easily switches between MM and MC using internal jumpers , while ACTI-DAMP circuitry allows for automatic impedance matching with the widest array of phono cartridges . The Phono Box is designed to connect to any line level input (aux , CD , tape , et al). Flexibility and performance per dollar make this phono stage a must for any entry-level turntable.
Features:
Metal case shields the electronics from vibrational and electromagnetic interference
Small size allows installation close to record player
Outboard power supply included
ACTI-DAMP-Circuit for automatic impedance matching for most cartridges
Optimal channel separation through dual-mono circuitry
Special low-noise ICs used
Gold plated RCA connection sockets
Technical Specifications for the Project Phono Box:
Input impedance, MM 47k Ohm/100pF
Input impedances, MC 100 Ohm/100pF
Output voltage 200mV/1kHz at 5mV/1kHz at MM input
Gain, MM 32dB
Output voltage 200mV/1kHz at 0,45mV/1kHz at MC input
Gain, MC 53dB
Noise floor, MM -88dB
Noise floor, MC -79dB
THD 0,005%
RIAA-equalisation curve accuracy 20Hz - 20kHz / max. 0,5dB
Power supply 16V/200mA AC
Power consumption 16V/40mA AC
Dimension W x D x H 112 x 115 x 30mm
Weight 280g without power supply
click here for a review c/o www.tnt-audio.com --> www.tnt-audio.com/ampli/phonobox_e.html
list price of brand new locally is around P6,500.00, letting go for a very low price of P5,500.00 or best reasonable offer. Shipping can be arranged as well...
If seriously interested, please call or text me at 0917-8004868 or 0922-8984868. Thank you very much and God bless!
Superman