|
Post by iceman90a on Mar 15, 2005 18:29:17 GMT 7
- wired ?? ;D ;D pls share your experiences - in bi-wiring ha!mine: i used to use thick copper wires in place of the brass jumpers - and had the + spkr wire connected to the tweeter and the - spkr wire to the woofer i tried playing around with the connections and found that plugging both + and - to the tweeter posts gave the highs i was looking for, but left the mids and bass behind now that i'm bi (and proud) wired ;D i got the sound i was looking for, better highs and a mid range that floats above the instruments
|
|
|
Post by hans adriane on Mar 16, 2005 1:57:33 GMT 7
Have my 9.2 biwired too with ordinary puresonic speaker wire for me sounding more transparent, balance and tunefull unlike when i used single wire sometimes there unbalance and music's not in synergy meron malakas or over. Not sure if its only noticable with new speaker (in break in stage ) usually new speaker first few hours sounded muddy, no bass, lean sounding etc.. kaya i tried to biwired them and got good result. Just like KOya ice mention music is floating... for me more organized. ;D
|
|
|
Post by hans adriane on Mar 16, 2005 2:18:32 GMT 7
KOYa Ice,
Pero sometimes you can't notice any improvement parang same as single wire lang.. Sa music kaya? o sa mind lang? ;D
|
|
|
Post by hans adriane on Mar 16, 2005 2:22:11 GMT 7
KOYa Ice, Notice big improvement when using silver for high and copper wire for low with this combo notice airy high and mid, for the bass better slam naman. than when using all copper and silver wire.
|
|
|
Post by iceman90a on Mar 16, 2005 8:14:25 GMT 7
KOYa Ice, Pero sometimes you can't notice any improvement parang same as single wire lang.. Sa music kaya? o sa mind lang? ;D honestly sa HT ko dati - Marantz AVR and Mission speakers - i didnt notice any difference between bi-wired and single wire pero ngayon meron talaga eh
|
|
|
Post by hans adriane on Mar 16, 2005 8:22:58 GMT 7
honestly sa HT ko dati - Marantz AVR and Mission speakers - i didnt notice any difference between bi-wired and single wire pero ngayon meron talaga eh Ako sa SS surplus intergrated rinig ko na. ;D
|
|
|
Post by hans adriane on Mar 16, 2005 8:24:09 GMT 7
honestly sa HT ko dati - Marantz AVR and Mission speakers - i didnt notice any difference between bi-wired and single wire pero ngayon meron talaga eh Or baka before di pa trained yun ears ko kaya di pa pansin..
|
|
|
Post by Control on Mar 16, 2005 9:32:42 GMT 7
Ako rin BI..............................bi-wired yung 8.3 ko... ;D
I use Silver wires for my HF and stranded copper wires on my LF connection...
|
|
|
Post by punk kid on Mar 16, 2005 9:59:19 GMT 7
KOYa Ice, Notice big improvement when using silver for high and copper wire for low with this combo notice airy high and mid, for the bass better slam naman. than when using all copper and silver wire. galing ng combo ano senor... parang gusto ko tuloy BI... wire ulit yung 8.3 ko kaso ginawa ko na palang IC yung wire ;D
|
|
|
Post by Control on Mar 22, 2005 13:41:43 GMT 7
galing ng combo ano senor... parang gusto ko tuloy BI... wire ulit yung 8.3 ko kaso ginawa ko na palang IC yung wire ;D no comment... ;D
|
|
|
Post by punk kid on Mar 22, 2005 13:55:09 GMT 7
kasi yung ang gamit mo ;D
|
|
|
Post by wanderlust on Mar 22, 2005 15:35:38 GMT 7
AKO DIN BI khit d bi-wirable speakers ko ngayon. still the difference is there. noticed this 1st with the 8.3 when i biwired a silver for the HF and copper for the LF, and since then its BI for me or nothing ;D ;D ;D
|
|
|
Post by audioslave on Mar 22, 2005 15:41:49 GMT 7
AKO DIN BI ;D ;D ;D BAI ka din? bisaya bai?? ;D
|
|
|
Post by garp on Mar 24, 2005 8:06:24 GMT 7
I can't tell the difference in biwiring. Maybe its just me or the wires I use. But I got a noticeable difference by using a quality wire to replace the link bars, which makes me think that maybe I should use high quality wire to appreciate biwiring.
|
|
|
Post by wanderlust on Mar 27, 2005 15:24:27 GMT 7
BAI ka din? bisaya bai?? ;D BISAYA gyod dong ;D
|
|
|
Post by avphile on Mar 31, 2005 11:15:45 GMT 7
I can't tell the difference in biwiring. Maybe its just me or the wires I use. But I got a noticeable difference by using a quality wire to replace the link bars, which makes me think that maybe I should use high quality wire to appreciate biwiring. Replacing those brass or gold-plated jumper plates between Hi and Lo terminals with any well constructed copper cables should make more sense. Afterall, copper is a much better electrical conductor than gold or brass.
|
|