|
Post by Superman on Jun 28, 2005 15:10:03 GMT 7
kim, sent you a PM...thanks!
|
|
|
Post by audioboy on Jun 28, 2005 16:38:49 GMT 7
|
|
|
Post by audioboy on Jun 28, 2005 16:46:19 GMT 7
ok na alignment ko pre. used the Rega Stevenson Protractor V2. Naka-align yung cart ko sa Rega Stevenson on the onset palang kaso overhang ko is around 12mm to 15mm. which is nasa gitna nung slots nun headshell but will try to extend the cart to around 17mm to 18mm. Was able to read this article about the rega baerwald and rega stevenson protractor. Baerwald distributes the distortion to the whole record while stevenson's distortion is more on the inner groove. BTW, nasubukan mo na yung kearns baerwald arc and stupid protractor? have not tried the other protractors. yeah i read the article too regarding distortion distribution on different protractors. 17.3 mm i think is ok. check this: www.diyaudio.com/forums/showthread/t-54835.html
|
|
|
Post by Superman on Jun 28, 2005 16:54:58 GMT 7
bro, ayaw nung link eh...error...thanks!
|
|
|
Post by audioboy on Jun 28, 2005 16:58:47 GMT 7
|
|
|
Post by audioboy on Jun 28, 2005 17:04:29 GMT 7
supes,
kindly report if you are getting an exact print scale. paki-check ang measurements. thanks.
|
|
|
Post by Superman on Jun 28, 2005 17:09:47 GMT 7
thanks pare! OK na found it...
kim, Ok na rin...kindly disregard my PM...i'll check the measurements...thanks!
|
|
|
Post by hans adriane on Jun 28, 2005 20:01:00 GMT 7
Guys,
I tried the rega stevenson and got very good results..
DOM Kimpao,
Btw almost same reading yun sa shure and technics.. hehehehe
|
|
|
Post by audioslave on Jul 1, 2005 22:12:53 GMT 7
Technics SL-1210 MK2 deck controls upclose
|
|
|
Post by kimpao on Jul 2, 2005 10:06:07 GMT 7
Technics SL-1210 MK2 deck controls upclose Ganda nung kuha atty, mukhang praktisadong-praktisado na ! Pwede nang bumili ng Nikon D70 o Canon 20D. Atty. julps Tried setting my cart's overhang at 17.3 mm, funny can't seem to get them aligned at the 3 points on the Stevenson. Got it aligned on the 3 points when I reduced it by 15 mm.
|
|
|
Post by audioboy on Jul 2, 2005 17:13:42 GMT 7
Atty. julps Tried setting my cart's overhang at 17.3 mm, funny can't seem to get them aligned at the 3 points on the Stevenson. Got it aligned on the 3 points when I reduced it by 15 mm. mine is set at 15mm. ok narin naman.
|
|
|
Post by m_shoe_maker on Jul 5, 2005 6:48:53 GMT 7
My Baby Monster ;D
|
|
|
Post by wanderlust on Jul 5, 2005 11:20:22 GMT 7
WOW.....
speechless ako dyan sa TT mo sir shoe... congrats!
|
|
|
Post by zetroce on Jul 5, 2005 14:14:56 GMT 7
My Baby Monster ;D IDOL Talaga!!! Sir MSM, magkano ba ang dapat i-budget to build a system similar to this one. Hindi naman kailangan na brand new, pwedeng used.
|
|
|
Post by audioslave on Jul 5, 2005 16:51:01 GMT 7
ang lufet ng TT mo IDOL Fritz... nung makita ko, iniisip ko agad kung pano ko pepektyuran TT mo sir, at kung anong mga angulo ang nararapat para mailabas natin ang natatanging kagwapuhan at kabruskohan ng TT mo... ;D
|
|
|
Post by m_shoe_maker on Jul 6, 2005 6:45:54 GMT 7
wanderlust, ;D zetroce, for a second hand unit, you can build something like that for roughly P250T. That includes already the mandatory speed controller (not pictured). audioslave, "kabruskuhan" is the word. That baby monster is around 120 pounds (heavier than me ;D). Dapat talaga nasa wall mount rack ko yan. But due to the weight, tinatamad ako mag karga. Ayoko maluslusan. ;D
|
|
|
Post by zetroce on Jul 6, 2005 8:15:40 GMT 7
zetroce, for a second hand unit, you can build something like that for roughly P250T. That includes already the mandatory speed controller (not pictured). Nakupo, kailangan ko palang ibenta lahat ng gears ko bago ako makabuo niyan, at second hand pa. Mahirap palang mag-ambisyon niyan. Pero, nakakagigil talaga yang TT mo. ;D Congrats pare.
|
|
narayan
Audionut
I am a peaceful soul
Posts: 234
|
Post by narayan on Jul 6, 2005 12:04:05 GMT 7
oonga. akala ko sumobra ng 0 sa dulo ang presyo until makita ko na 120lbs pala to ;D
looks intimidating to me ;D
|
|
|
Post by zetroce on Jul 8, 2005 10:26:39 GMT 7
LUXMAN PD-284
|
|
|
Post by zetroce on Jul 8, 2005 10:34:37 GMT 7
oonga. akala ko sumobra ng 0 sa dulo ang presyo until makita ko na 120lbs pala to ;D looks intimidating to me ;D Obet, display mo na yung bago mong TT!!!
|
|